600mm Cumaru Grain Vanity — Brazilian Wood Tone in a Wall-Hung Cabinet — FAME bathroom cabinet manufacturer
New 2026 · BR Market · Cumaru Grain

600mm Cumaru Grain Vanity — Brazilian Wood Tone in a Wall-Hung Cabinet

Cumaru is the hardwood Brazilian buyers recognise before they read the spec sheet: a warm red-brown with a fine, straight grain and a slight olive shift in the darker lines. Solid cumaru is not a sensible material for a bathroom cabinet — it moves with humidity and it is expensive in the widths a door needs — so this unit uses a cumaru-grain face on an 18 mm flat door, colour-matched across doors, drawer front and end panels, at about 10 percent sheen. At 600 mm wide and 480 mm tall it fits the compact bathrooms that most Brazilian apartments actually have, and because nothing touches the floor there is no plinth to swell or darken in a wet room. The basin is set flush into a 20 mm quartz top rather than dropped on, so there is no raised rim and no silicone line to go black behind it.

  • 600 mm (23.6 in) wide wall-hung cabinet, 480 mm deep, 480 mm carcass height; 560 mm, 700 mm and 800 mm widths on the same carcass programme
  • 18 mm flat door fronts with cumaru-grain face, vertical grain running through doors and drawer front, matt finish at about 10 percent sheen
  • One wide drawer under two doors, brass knob between the doors and a 160 mm brass bar pull on the drawer, set on the centre line
  • Flush-set white glazed ceramic basin in a 20 mm white quartz top with a slim square edge and no upstand
  • 18 mm moisture-resistant plywood carcass with sealed edges and a sealed back panel; one adjustable shelf behind the doors
  • Soft-close hinges standard, Blum hinges and TANDEMBOX runners available on the same drilling; MOQ 20 pcs per model

SKU: FAME-CU-600 · MOQ: 20 pcs · Sample order available

Specifications

Sizes600 mm (23.6 in) wide standard, 480 mm deep, 480 mm carcass height; 560 mm, 700 mm and 800 mm widths and 450 mm depth on the same carcass programme
Carcass18 mm moisture-resistant plywood with sealed back panel and ABS-sealed edges; E1/E0 board option; MDF carcass available where the run is dry-wall only
Fronts18 mm flat doors and drawer front with cumaru-grain face, square edges, 3 mm shadow gaps; grain direction matched vertically across the pair of doors
FinishCumaru tone: warm red-brown with a fine straight grain and darker olive-brown lines, matt at about 10 percent sheen, UV-stable face; colour matched batch to batch across doors, front and end panels
InteriorOne full-extension deep drawer with a dovetail box under the doors, plus one adjustable shelf behind them; interior in a pale oak decor
Countertop20 mm white quartz with a fine speckle, slim square edge, no upstand; 30 mm quartz or solid surface cut to the same template on request
BasinOne white glazed ceramic basin set in flush with a thin rim, overflow drilled; single tap hole pre-drilled, three-hole on request
HardwareSoft-close hinges standard; brass knob between the doors and a 160 mm brass bar pull on the drawer; Blum hinges and Blum TANDEMBOX runners optional on the same drilling
InstallationWall-hung on a welded steel rail; masonry and 12.5 mm board over timber stud fixings supplied; 600 mm width is a one-person lift before the top is fitted
CertificationsISO9001, CE, SGS, IP44, FSA

Verification & Compliance — Evidence Behind Every Claim

Every FAME unit is built and inspected to the same standards we ship to the world's top-10 bathroom brands. Each claim below carries a verifiable anchor — certificates and inspection reports are available for review on request or during factory audits.

ISO9001 Quality management system CE EU conformity marking SGS Third-party inspected IP44 Splash & moisture resistance per IEC 60529 FSA Forest & safety assurance
IP44 moisture protectionRated to IEC 60529 (splash-proof, protection against objects >1mm). Test method and report available on request.
Soft-close hardwareBlum optional — see Blum official specifications.
Company credentialsFounded 2009 · 20,000 m² factory · supplier to global top-10 bathroom brands. See About FAME and Certifications.
Third-party verificationSGS inspection reports and certificate scans available with your quotation — request them here.

In a Real Bathroom

600mm Cumaru Grain Vanity — Brazilian Wood Tone in a Wall-Hung Cabinet in a real bathroom setting

Every FAME unit is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.

Product FAQ

Is this solid cumaru or a cumaru-grain face?
A cumaru-grain face on an 18 mm door, and that is a deliberate choice rather than a cost shortcut. Solid cumaru moves: in a bathroom that cycles between 60 and 90 percent relative humidity it will cup across a 300 mm door within a season, and the finish cracks at the joint before the wood fails. A stable board with a matched face gives the colour and the straight grain that buyers are actually specifying, keeps the door flat, and lets the same tone run across doors, drawer front and end panels without a batch mismatch. If a project genuinely wants solid wood stiles, the same elevation can be built as a framed door in solid cumaru on a plywood core — that is a different price and a different lead time, and it should be decided at quotation, not after the sample.
Why 600 mm for the Brazilian market?
Because 600 mm is the width that fits the bathrooms in the apartments that drive volume here: it leaves room for a 700 mm shower and a toilet on a 2.2 m wall, which a 1000 mm unit does not. Depth matters as much as width in the narrow layouts, so the programme is offered at 450 mm as well as 480 mm — the 450 mm version keeps the door clear of a swing where the vanity sits behind the door. Larger houses mostly go to 1000 mm and 1200 mm with a double basin; that path exists on the same carcass programme, so an importer can order the compact model first and add the wide model to the same container without a second tooling set.
What happens to a wood-tone face in a wet room?
Nothing, provided the face is a sealed decor and not a raw veneer. The door is a stable board with a sealed face on both sides and ABS edging, so water that runs down the front cannot reach a core; the parts that fail in a bathroom are the bottom edge of a floor-standing plinth and the joint behind a dropped-in basin rim, and this unit removes both — it is wall-hung, and the basin is set flush into the top from below. Sealed end panels are standard because the exposed side is where a splash actually lands. For coastal projects we add a sealed back panel and stainless fixings on request.
Can the brass hardware be changed?
Yes, and it is worth deciding at order. The default is a brass knob between the doors and a 160 mm brass bar pull on the drawer, both on 96 mm and 160 mm centre drilling. The same fronts can be supplied handleless with a routed J-profile along the top edge, or with black or brushed nickel pulls, without changing the door. If the project needs Blum TANDEMBOX rather than our standard soft-close runner, the drawer box and the drilling change together — that has to be on the order, because retrofitting it means a new drawer box rather than a new runner.
What is the MOQ for this model?
Our MOQ is 20 pieces per model, with sample orders welcome for pre-production evaluation. Widths and two decor options can be mixed inside the 20 pieces because the carcass, drilling and shadow gap are identical across the programme.

Quote This Model for Your Program

Tell us quantity, finish and destination port — we'll come back with pricing, lead time and a sample proposal.

Request a Quote