New 2026 · UK Market · Wall-Hung · Waterproof Plywood

800 mm Ivory Matt Waterproof-Plywood Vanity Unit with Mirrored Cabinet

UK bathrooms are among the smallest in Europe, and the 2026 specification reflects it: the 600–800 mm wall-hung unit is the volume format, matt finishes outsell gloss, and soft-close hardware is assumed rather than sold as an upgrade. The one thing British buyers will not compromise on is water resistance — a build that survives a windowless en-suite instead of swelling behind the doors after a season of shower steam. This 800 mm unit is engineered to that brief. The carcass is exterior-grade waterproof plywood, 18 mm panels with sealed edges and a moisture-resistant back panel, and the fronts are ivory matt lacquer with a PU exterior over a melamine interior — the finish family that hides finger marks and hard-water spotting far better than gloss, and the tone that has taken over from stark white in UK specification. Two doors run on 304-grade stainless-steel soft-close hinges, with Blum hardware available on request. The basin is a one-piece glazed ceramic bonded directly into the cabinet top, so there is no counter to template on site and no silicone seam where water sits; the recessed open shelf below the basin deck keeps a hand towel within reach in a room with no floor space to spare. The front can be supplied handleless on the same carcass for the flush look most UK retailers now show. The matching mirrored wall cabinet hangs at the same width and ships as one set SKU with the vanity, and the complete 600 / 700 / 800 / 900 mm width run is produced in one programme from our 20,000 m² factory, against the same export standard we supply to the world's top-10 building-material brands.

800 mm (31.5″) wall-hung format inside a 600 / 700 / 800 / 900 mm width run — 600–700 mm covers UK cloakrooms and en-suites, 800–900 mm fits family bathrooms, all built in one programme
Exterior-grade waterproof plywood carcass — 18 mm panels with sealed edges and a moisture-resistant back panel, which is what stops the most common UK failure: a back panel that swells behind the doors in a windowless en-suite
Ivory matt lacquer fronts, PU exterior over a melamine interior — the tone that has displaced stark white in UK specification, in a finish that hides finger marks and hard-water spotting far better than gloss
One-piece glazed ceramic basin bonded into the cabinet top — no counter to template on site, no stone fabricator, and no silicone seam where water and cleaning residue collect
Recessed open shelf below the basin deck keeps a hand towel or soap within reach in rooms with no floor space to spare
304-grade stainless-steel soft-close hinges as standard; Blum soft-close hinges and slides available on request
Slim brushed stainless-steel bar pulls as standard, with a handleless push-open front available on the same cabinet for the flush look UK retailers show
Matching mirrored wall cabinet at the same width — 4 mm mirror glass in an ivory matt frame, shipped as one set SKU with the vanity
Slim 500 mm depth with a compact rear service void sized for standard UK pipework and a 32 mm waste; single-hole faucet drilling standard with a 3-hole option for UK mixer sets
Flat-pack export cartons container-optimised for UK ports with corner guards and a mounting template in every unit; MOQ 20 pcs per model, with sample orders welcome before production

Request Factory Quote Back to All Bathroom Cabinets

SKU: FAME-UK-0915 · MOQ: 20 pcs · Sample order available

Specifications

Sizes	800 mm (31.5″) W × 500 mm D × 520 mm H cabinet, excluding the mirrored cabinet; size run 600 / 700 / 800 / 900 mm (23.6″ / 27.6″ / 31.5″ / 35.4″) produced in one programme
Construction	Exterior-grade waterproof plywood carcass, 18 mm panels with sealed edges and a moisture-resistant back panel; dowel-and-screw assembly with an adjustable internal shelf
Fronts	Ivory matt lacquer with a PU exterior over a melamine interior; smooth matt lacquer also available in white, greige, sage and charcoal; handleless push-open front option on the same carcass
Basin and shelf	One-piece glazed white ceramic basin bonded into the cabinet top, with overflow; recessed open shelf below the basin deck for towels and soap; white and biscuit basin options
Faucet	Single-hole drilling standard for a single-lever mixer; 3-hole and no-bore versions available on the same top for UK mixer sets. Faucet supplied separately or sourced to your specification
Doors and storage	Two doors on soft-close hinges with an adjustable internal shelf; concealed pull-out tray and internal organiser configurable on OEM orders
Hardware	304-grade stainless-steel soft-close hinges standard; Blum soft-close hinges and slides optional on request; slim brushed stainless-steel bar pulls as standard
Mirror	Matching mirrored wall cabinet at the same cabinet width — 4 mm mirror glass in an ivory matt frame; a separate vanity mirror or anti-fog LED mirror is available on request
Installation	Wall-hung floating on a concealed mounting bracket; fixing kit, wall-reinforcement specification and mounting template supplied with every unit; depth and rear service void sized for standard UK pipework and a 32 mm waste
Packaging	Flat-pack RTA export cartons container-optimised for UK ports with corner guards and a mounting template in every unit; carton dimensions quoted per size on request
Certifications	ISO9001, CE, SGS, IP44, FSA; IP44 splash-resistance reference per IEC 60529, with SGS inspection reports and certificate scans available with quotations
Warranty	4-year structural warranty on request

Verification & Compliance — Evidence Behind Every Claim

Every FAME unit is built and inspected to the same standards we ship to the world's top-10 bathroom brands. Each claim below carries a verifiable anchor — certificates and inspection reports are available for review on request or during factory audits.

ISO9001 Quality management system CE EU conformity marking SGS Third-party inspected IP44 Splash & moisture resistance per IEC 60529 FSA Forest & safety assurance

IP44 moisture protection	Rated to IEC 60529 (splash-proof, protection against objects >1mm). Test method and report available on request.
Soft-close hardware	Blum optional — see Blum official specifications.
Company credentials	Founded 2008 · 20,000 m² factory · supplier to global top-10 bathroom brands. See About FAME and Certifications.
Third-party verification	SGS inspection reports and certificate scans available with your quotation — request them here.

In a Real Bathroom

Every FAME unit is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.

Product FAQ

Why waterproof plywood rather than MDF for a UK bathroom?

Plywood is a cross-layered veneer panel, so it resists the swelling and edge-crumbling that MDF shows when a windowless en-suite stays humid or a leak goes unnoticed for a few weeks — the failure mode behind most warranty returns in this category. We use exterior-grade plywood with waterproof adhesive, sealed edges and a moisture-resistant back panel, so the panel holds its dimensions through container transit and a humid service life. MDF stays available for dry-area cloakrooms and price-driven programmes where the buyer has made that trade-off deliberately.

Does the unit fit standard UK pipework and a 32 mm waste?

Yes. The cabinet is 500 mm deep with a rear service void for supply lines and the trap, and we publish the drainage and fixing positions with every quotation so your installer can check them against the existing rough-in before ordering. UK pipework and a 32 mm waste are the default our depth is sized around; because the unit floats, the waste can run to the wall or drop through the floor inside the service void.

Is the basin really one piece — will I need a stone fabricator?

No fabricator needed. The glazed ceramic basin is bonded into the cabinet top at our factory and the faucet holes are drilled to your specification before packing, so the unit arrives as a finished top-and-basin assembly. Your side only hangs the cabinet on the bracket and connects supply and waste — no counter cut-out to template and no silicone seam between basin and counter for water and cleaning residue to collect in.

Can we have the same unit in the smaller 600 mm cloakroom size?

Yes. The 600 / 700 / 800 / 900 mm widths share the same carcass construction, front family, basin type and hardware, so a UK programme can mix cloakroom, en-suite and family-bathroom sizes on a single order with matching fronts and mirrored cabinets throughout.

Do you offer a handleless version?

Yes — the same carcass runs with a push-open shadow-gap front instead of bar pulls, which is the format most UK retailers now display. Tell us which doors should be handleless and we will confirm the opening clearance and the reinforcement detail on the shop drawing.

What is the MOQ and how does sampling work?

Our MOQ is 20 pieces per model, with sample orders welcome for pre-production evaluation. Cartons are flat-pack and container-optimised for UK ports, and we quote the complete 600–900 mm width run and the matching mirrored cabinets in a single programme.