New 2026 · FR 800 mm Format · Chêne Clair

800 mm Light Oak Fluted Wall-Hung Vanity — Integrated Ceramic Basin

French bathrooms in 2026 are being specified around a single constraint: floor area. The typical apartment salle de bain runs between four and six square metres, often with no window, and that is why a wall-hung unit has stopped being a design decision and become the default specification - nothing touches the floor, so the room reads larger and the whole floor is cleanable in one pass. This 800 mm wall-hung unit is aimed squarely at that format. It sits above the 600 mm units that fill the entry level and below the 1000-1200 mm runs that need the wall length of a house, which is exactly the band a French distributor needs in volume. The front is a light natural oak with fine vertical fluting, the warm timber direction that has displaced grey and high-gloss white across French specification in the last two seasons, and the fluting is milled into the panel rather than applied as a glued strip, so the profile survives transport and daily cleaning. The countertop is a slim white slab with the glazed ceramic basin formed as one integrated piece - no separate bowl to seal, no countertop to cut or template on site, and no silicone joint to fail in the wettest room in the apartment. A full-width handleless drawer opens on a horizontal grooved pull, so there is no handle to catch a towel in a narrow room. Behind the front sits a sealed marine-grade plywood carcass as standard, with a full PVC waterproof body available for windowless interior bathrooms - the version French specifiers ask for most often. The matching LED mirror is quotable on the same order, so one purchase order covers the whole wall.

800 mm wide by 470 mm deep by 480 mm tall wall-hung unit - the apartment format that steps up from 600 mm without consuming the wall length a double basin needs
Light natural oak front with fine vertical fluting, milled into the panel rather than applied, in a low-sheen matte finish that hides handling marks in transit
Full-width handleless drawer on a horizontal grooved pull - no protruding handle to catch on a towel in a four-square-metre bathroom
Slim white stone-look countertop with the glazed ceramic basin formed as one integrated piece - no separate bowl to seal and no countertop fabrication on site
Sealed marine-grade plywood carcass as standard, with a full PVC waterproof body option for windowless interior bathrooms and humid coastal regions
Blum soft-close hinges and runners available as an upgrade, with Hettich and DTC as alternatives on the same drilling pattern
Wall-hung on a concealed steel bracket, with the wall-reinforcement specification issued with every order - nothing touches the floor, so the room reads larger
Optional matching LED mirror with anti-fog glass and three-colour light, IP44 rated, quotable on the same purchase order as the vanity
600 / 800 / 1000 mm from the same fluted front family, so one order covers entry, apartment and family bathrooms in a single program
CE marking and ISO9001 / SGS documentation supplied with the shipment for EU import clearance

Request Factory Quote Back to All Bathroom Cabinets

SKU: FAME-MF-1726 · MOQ: 20 pcs · Sample order available

Specifications

Sizes	800 mm (31.5 in) wide standard; 600 / 1000 mm from the same fluted front family; 470 mm deep, 480 mm cabinet height, wall-hung
Construction	Sealed marine-grade multi-layer plywood carcass with moisture-sealed edges as standard; full PVC waterproof body available for windowless interior bathrooms and humid coastal regions
Fronts / Finish	Light natural oak fluting milled into the panel, low-sheen matte lacquer; plain oak and flat-slab fronts available on the same tooling for volume retail
Top / Basin	Slim white stone-look slab countertop with the white glazed ceramic basin formed as one integrated piece, with overflow; supplied ready to install with no countertop fabrication required
Storage	One full-width handleless soft-close drawer with a siphon recess cut into the back panel and a horizontal grooved pull; internal anti-slip lining and reinforced base panel
Hardware	Grooved pull as standard, no protruding handle; brushed-brass or matt-black accent strip available. Blum soft-close hinges and runners optional, Hettich and DTC as alternatives
Faucet (optional)	Deck-mounted single-lever mixer in polished chrome, brushed brass or matt black; drillings to your market standard
Mirror (optional)	Matching LED mirror with anti-fog glass and three-colour light, IP44 rated; supplied on the same order as the vanity so finish and grain direction match
Installation	Wall-mounted on a concealed steel bracket; wall-reinforcement specification supplied with every order; no legs and no plinth, so the floor stays clear for cleaning
Load rating	Top surface 50 kg, drawer 8 kg; reinforced base panel under the basin
Certifications	ISO9001, CE, SGS, IP44, FSA
MOQ	20 pieces per model; mixed widths within the same fluted front family can be combined in one order. Sample orders welcome for pre-production evaluation

Verification & Compliance — Evidence Behind Every Claim

Every FAME unit is built and inspected to the same standards we ship to the world's top-10 bathroom brands. Each claim below carries a verifiable anchor — certificates and inspection reports are available for review on request or during factory audits.

ISO9001 Quality management system CE EU conformity marking SGS Third-party inspected IP44 Splash & moisture resistance per IEC 60529 FSA Forest & safety assurance

IP44 moisture protection	Rated to IEC 60529 (splash-proof, protection against objects >1mm). Test method and report available on request.
Soft-close hardware	Blum optional — see Blum official specifications.
Company credentials	Founded 2008 · 20,000 m² factory · supplier to global top-10 bathroom brands. See About FAME and Certifications.
Third-party verification	SGS inspection reports and certificate scans available with your quotation — request them here.

In a Real Bathroom

Every FAME unit is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.

Product FAQ

Pourquoi 800 mm pour le marche francais ?

800 mm is the width that fits the two layouts French buyers work with most: an apartment salle de bain of four to six square metres, where it steps up from the 600 mm units that dominate the entry level without needing the wall length of a 1000-1200 mm run, and a family bathroom where it is the widest single-basin format before you commit to two bowls. Because we build 600, 800 and 1000 mm from the same fluted front family, an importer can cover the whole apartment range as one program at a 20-piece MOQ per model instead of placing separate orders. Send your size split and we quote the full run together.

Is the fluting applied or milled into the panel?

It is milled into the panel itself, not a glued-on strip. That matters in a wall-hung unit because an applied profile can lift at the edges over the life of the cabinet, especially in a bathroom that is regularly steamed. The milled profile also means the grain runs continuously through the ribs, so the front reads as one piece of timber rather than a series of attached parts, and it can be sanded and refinished if the unit is ever damaged in service.

Which carcass should I order for a bathroom without a window?

Sealed marine-grade multi-layer plywood is our standard carcass, and a full PVC waterproof body is available as an option for windowless interior bathrooms and humid coastal regions. Plywood holds its shape, its screw-holding strength and its moisture resistance far better than particleboard, which is the panel that fails first in a humid bathroom. We state the panel type and the edge-sealing method in writing on your quotation, and for a room with no ventilation we recommend the PVC body without qualification.

Can I order the vanity and the matching LED mirror on the same purchase order?

Yes. We build a matching LED mirror with anti-fog glass and three-colour lighting, IP44 rated, and it can be quoted on the same PO as the vanity. Both come from the same factory, so the finish and the grain direction match instead of being two suppliers' separate best attempts. Specify the mirror width and the light colour temperature and we confirm the set drawing before production.

What is the MOQ, and are the CE and SGS documents supplied for EU import?

MOQ is 20 pieces per model, with samples welcome before you commit to a run, and mixed widths from the same front family can be combined in one order. Hangzhou Fame Industry Co., Ltd. has supplied global top-10 building-material brands since 2008 from a 20,000 m2 factory in Zhejiang, and we hold ISO9001, CE, SGS, IP44 and FSA certification. Certificate scans and SGS inspection reports are issued with your quotation or with the shipment - request them at contact@famechina.com or on WhatsApp +852 6159 8571.