New 2026 · AU 1000 mm Format · Coastal Sand-Oak

1000 mm Sand-Oak Fluted Wall-Hung Vanity — Integrated Ceramic Basin

Australian bathrooms in 2026 have moved past plain white: the palettes that sell now are coastal — sand, warm off-white and sage — and the finish buyers keep asking for is timber-look oak, not gloss. This 1000 mm wall-hung unit answers that brief in the format AU specifiers actually build around. The carcass and drawer fronts are one continuous fluted (reeded) sand-oak face, machined as a single run per front so the reeding lines up evenly across both drawers instead of drifting. The basin is not a separate bowl sitting on a stone top: the one-piece ceramic top-and-basin is moulded and glazed as one unit, so there is no joint to seal, no stone to cut and no templating on site — a real saving for importers and builders who would otherwise arrange that per unit. Behind the fronts sits a sealed marine-grade plywood body (a full PVC waterproof body is available for coastal or poorly ventilated rooms), two full-extension soft-close drawers with a siphon recess cut into the back panel, and brushed brass bar handles on a drilling pattern shared with matt black and brushed nickel. It is sized at 1000 mm because that is the width that covers an Australian en-suite or main bathroom with one proper basin and a usable drawer run, and it pairs with a matching mirrored shaving cabinet — the mirror-fronted storage cabinet Australian bathrooms are built around — as an optional complete set.

1000 mm wide by 460 mm deep by 480 mm tall — the width that covers an Australian en-suite or main bathroom with one full basin and a usable drawer run
Coastal sand-oak timber-look finish with vertically fluted (reeded) drawer fronts, machined as one piece per front so the reeding stays aligned across both drawers
One-piece ceramic top with the basin moulded and glazed in — no joint to seal, no stone cutting, no templating on site and no silicone work at your end
Sealed marine-grade plywood body as standard, with a full PVC waterproof body option for coastal homes and windowless bathrooms
Two full-extension soft-close drawers with a siphon recess cut into the back panel, so the trap never eats usable drawer depth
Brushed brass bar handles as standard; matt black and brushed nickel available on the same drilling pattern for range consistency
Wall-hung on a concealed steel bracket with a wall-reinforcement specification supplied with every order
Optional matching mirrored shaving cabinet with LED and anti-fog, IP44 rated — quotable as a complete bathroom set on one PO
Blum soft-close hinges and runners available as an upgrade, with Hettich and DTC as alternatives
Widths 800 / 900 / 1000 / 1200 mm from the same front family, so one order can cover a full size band at a 20-piece MOQ per model

Request Factory Quote Back to All Bathroom Cabinets

SKU: FAME-AU-0923 · MOQ: 20 pcs · Sample order available

Specifications

Sizes	1000 mm (39.4 in) wide standard; 800 / 900 / 1200 mm from the same front family; 460 mm deep, 480 mm cabinet height, wall-hung
Construction	Sealed marine-grade multi-layer plywood body with moisture-sealed edges as standard; full PVC waterproof body available for coastal and windowless bathrooms
Fronts / Finish	Continuous vertically fluted (reeded) fronts in coastal sand-oak timber-look lacquer with a low-sheen, handling-mark-resistant surface; carcass and side panels in matching sand-oak. Flat-slab and PVC-membrane fronts on the same tooling for volume retail
Top / Basin	One-piece glazed white ceramic top with the basin moulded into the unit, with overflow; supplied ready to install with no countertop fabrication required
Storage	Two full-extension soft-close drawers with a siphon recess in the back panel
Hardware	Brushed brass bar handles as standard; matt black or brushed nickel on the same drilling pattern. Blum soft-close hinges and runners optional, Hettich and DTC as alternatives
Faucets (optional)	Deck-mounted single-lever mixer in brushed brass, chrome or matt black; drillings to your market standard
Shaving cabinet (optional set)	Matching mirror-fronted shaving cabinet with internal shelving, anti-fog and three-colour LED, IP44 rated; supplied as a complete set on one order
Installation	Wall-mounted on a concealed steel bracket; wall-reinforcement specification supplied with every order; no legs or plinth, floor stays clear
Load rating	Top surface 50 kg, each drawer 8 kg; drawer interiors lined with anti-slip material and a reinforced base panel
Certifications	ISO9001, CE, SGS, IP44, FSA
MOQ	20 pieces per model; mixed widths within the same front family can be combined in one order. Sample orders welcome for pre-production evaluation

Verification & Compliance — Evidence Behind Every Claim

Every FAME unit is built and inspected to the same standards we ship to the world's top-10 bathroom brands. Each claim below carries a verifiable anchor — certificates and inspection reports are available for review on request or during factory audits.

ISO9001 Quality management system CE EU conformity marking SGS Third-party inspected IP44 Splash & moisture resistance per IEC 60529 FSA Forest & safety assurance

IP44 moisture protection	Rated to IEC 60529 (splash-proof, protection against objects >1mm). Test method and report available on request.
Soft-close hardware	Blum optional — see Blum official specifications.
Company credentials	Founded 2008 · 20,000 m² factory · supplier to global top-10 bathroom brands. See About FAME and Certifications.
Third-party verification	SGS inspection reports and certificate scans available with your quotation — request them here.

In a Real Bathroom

Every FAME unit is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.

Product FAQ

Why 1000 mm for an Australian bathroom?

1000 mm is the width that covers the two layouts Australian buyers actually build: an en-suite or main bathroom with one proper basin and enough drawer run to be useful. Narrower units (600-800 mm) remain the volume size for apartments and powder rooms, and 1200-1500 mm double-basin units appear in larger family homes; the 1000 mm sits in the middle as the single-basin size that never feels cramped. Because we build 800, 900, 1000 and 1200 mm from the same front family, a whole size band can be quoted as one program at a 20-piece MOQ per model rather than as separate orders.

What does the integrated ceramic top actually save us?

The ceramic top and basin are moulded and glazed as one piece before packing, which removes three jobs from your side: there is no stone or composite top to fabricate, nothing to template on site, and no joint between basin and top to seal and maintain. For importers selling to builders and renovators that means one unpack-and-hang step instead of coordinating a stonemason per unit, and it removes the most common post-installation complaint in the category — leaks and mould at the basin-to-top joint. Send your waste and tap positions at order stage and we confirm the top drawing before production.

Is the body suitable for a humid or coastal Australian bathroom?

Sealed marine-grade multi-layer plywood is our standard body on this model, and a full PVC waterproof body is available as an option. Plywood keeps its shape, its screw-holding strength and its moisture resistance far better than particleboard, which matters in a room with a shower and no window. We state the panel type and edge-sealing method in writing on your quotation, and we recommend the PVC body where humidity runs high or ventilation is poor.

Can you supply the matching shaving cabinet as part of the order?

Yes. We build a matching mirror-fronted shaving cabinet with internal shelving, anti-fog glass and three-colour LED lighting, IP44 rated, finished to match the vanity. It can be quoted on the same PO as the vanity so a builder receives a complete bathroom unit rather than buying the mirror separately — and because both come from the same factory, the finish and grain direction match instead of being two suppliers' best attempts. Specify width and light colour temperature and we will confirm the set drawing.

What is the MOQ and lead time for an Australian program?

MOQ is 20 pieces per model, with samples welcome before you commit to a run. Typical production lead time is 30 to 35 days after sample approval plus sea freight; we quote realistic transit times per Australian port (Sydney, Melbourne, Brisbane, Fremantle) so your landed cost is not a surprise. FAME has supplied global top-10 building-material brands since 2008 from a 20,000 m2 factory in Zhejiang, and we hold production slots for repeat Australian programs.