900mm Aluminium Floating Vanity — Coastal-Grade Waterproof Body — FAME bathroom cabinet manufacturer
New 2026 · Australia Coastal 900 mm · Aluminium Body · Wall-Hung

900mm Aluminium Floating Vanity — Coastal-Grade Waterproof Body

The bathrooms we are quoting most for Australia in 2026 are the ones closest to the water. On the coast, salt air sits on every surface in the room, and the timber or particleboard edges that survive an inland bathroom are the first thing to swell, lift and delaminate in a beachside apartment — which is exactly what generates the warranty claims importers hate. 900 mm is the width that fills those rooms: wide enough for a genuinely usable basin and two proper drawers, narrow enough to leave the floor and door swing clear in a compact Australian bathroom. So this unit is built around an aluminium body rather than a panel carcass. The cabinet is an extruded 6063-series aluminium frame with sealed welded corners and a cured powder-coat finish inside and out, which means there is no raw cut edge anywhere in the wet zone for moisture to get into, and nothing for salt air to rust. The front is a flat, smooth powder-coated drawer face rather than a ribbed or grooved one, decorated only by a slim brushed-brass bar handle — warm-toned metal that reads as a deliberate accent instead of a chrome mirror. The top is a slim white engineered stone with a white ceramic basin set flush into it, so there is no proud rim for water or cleaner to sit against, and the deck is drilled and cut at the factory so no stone work happens on site. Two soft-close drawers on full-extension runners give the storage a family bathroom actually needs, with the siphon recess cut into the box. MOQ is 20 pieces per model, and because the same body tooling runs 750 mm and 1200 mm versions, a full Australian size ladder quotes as one programme instead of three suppliers.

  • 900 mm (35 in) wide x 460 mm (18 in) deep — the Australian apartment width that clears the door swing while still taking a full-size basin and two usable drawers
  • Extruded 6063-series aluminium body with sealed welded corners — no timber or particleboard cut edge in the wet zone, so there is nothing to swell or delaminate in a humid bathroom or along a salt-air coast
  • Cured powder-coat finish inside and out in matte blue-grey as standard; matte white, sand, sage and warm timber-effect finishes run from the same tooling
  • Flat, smooth powder-coated drawer fronts — a clean panel face with no fluting and no grooved detail to trap dust or water in a bathroom
  • Slim white engineered-stone top, approx. 20 mm, with the white glazed ceramic basin set flush — no proud rim for water, soap or cleaner to sit against
  • Two side-by-side soft-close drawers on full-extension runners, with the siphon recess cut into the lower box; waste kit and drainer supplied in stainless steel or brass
  • Slim brushed-brass bar handles on both drawers — warm-toned fittings that hold their colour rather than a chrome-effect substitute
  • Wall-hung on a concealed steel bracket supplied with every order, so the floor stays clear and an apartment bathroom reads larger
  • Blum soft-close hinges and runners available as an upgrade on the same drilling pattern, with Hettich and DTC offered as alternatives
  • Matching LED mirror optional (3-colour light, anti-fog, time and temperature display) or a plain frameless mirror — quotable on the same purchase order at 20 pcs MOQ per model

SKU: FAME-AU-0930 · MOQ: 20 pcs · Sample order available

Specifications

Sizes900 mm (35 in) wide x 460 mm (18 in) deep as standard; 750 mm and 1200 mm versions tooled from the same body; 850 mm counter height as standard, with 800 mm and 900 mm available on request
ConstructionExtruded 6063-series aluminium cabinet body and drawer fronts with sealed welded corners, cured powder-coat finish inside and out — no timber or particleboard cut edge in the wet zone
Front / drawer styleTwo side-by-side drawer fronts in flat, smooth powder-coated aluminium with no ribbing and no vertical grooving; slim brushed-brass bar handle on each drawer
FinishMatte blue-grey powder coat as standard; matte white, sand, sage and warm timber-effect finishes available across the same tooling
TopSlim white engineered stone, approx. 20 mm thick with a small even overhang; sintered stone and natural stone-look alternatives available
BasinWhite glazed ceramic basin set flush into the top with no proud rim; drilled and cut in the factory; overflow and waste kit supplied
StorageTwo soft-close drawers stacked side by side on full-extension runners, each with one brushed-brass bar handle; siphon recess cut into the drawer box
HardwareBlum soft-close runners available as an upgrade on the same drilling pattern; Hettich and DTC available as alternatives; all fixings supplied
Mirror (optional)Matching LED mirror with touch switch, anti-fog and 3 colour temperatures, or a plain frameless mirror, quotable on the same purchase order
InstallationWall-hung on a concealed steel hanging bracket; wall reinforcement or suitable fixings required — a fixing guide is supplied with each order
ComplianceISO9001, CE, SGS, IP44 and FSA; certificate scans and SGS inspection reports issued with your quotation on request
Warranty5-year structural warranty available on request for programme orders
PackingSemi-assembled or knock-down, foam-lined carton with corner and edge protection; container load plan supplied against your size and finish mix
MOQ20 pieces per model; widths and finishes can be mixed within one order. Sample orders welcome for pre-production evaluation

Verification & Compliance — Evidence Behind Every Claim

Every FAME unit is built and inspected to the same standards we ship to the world's top-10 bathroom brands. Each claim below carries a verifiable anchor — certificates and inspection reports are available for review on request or during factory audits.

ISO9001 Quality management system CE EU conformity marking SGS Third-party inspected IP44 Splash & moisture resistance per IEC 60529 FSA Forest & safety assurance
IP44 moisture protectionRated to IEC 60529 (splash-proof, protection against objects >1mm). Test method and report available on request.
Soft-close hardwareBlum optional — see Blum official specifications.
Company credentialsFounded 2008 · 20,000 m² factory · supplier to global top-10 bathroom brands. See About FAME and Certifications.
Third-party verificationSGS inspection reports and certificate scans available with your quotation — request them here.

In a Real Bathroom

900mm Aluminium Floating Vanity — Coastal-Grade Waterproof Body in a real bathroom setting

Every FAME unit is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.

Product FAQ

Why an aluminium body instead of sealed plywood or PVC?
Because coastal Australia is a different problem from inland Australia. Salt air settles on every surface of a bathroom and keeps working on it long after the room has dried out, and the failure we see first in beachside apartments is a sealed panel or melamine board where the edge seal has been broken during transport or installation and the core has taken on moisture. An extruded aluminium body with sealed welded corners removes that failure mode entirely: there is no core to absorb water and no edge to swell, and the metal cannot rust. A full-PVC build is a good wet-area answer too, but PVC is softer under load and heavier in the panel, so we normally quote aluminium for coastal programmes and sealed plywood or PVC for inland projects. Tell us the postcode or region the order is going to and we will recommend the right body for it.
Will an aluminium cabinet look like a metal box in the room?
No — the body is powder-coated, not left as bare metal, so it reads as a matte painted cabinet surface rather than a steel locker. The standard finish is a matte blue-grey, with matte white, sand, sage and warm timber-effect options available from the same tooling; the drawer faces are flat and smooth with no ribbing or grooving, and the only metal you see deliberately is the slim brushed-brass bar handle on each drawer. Because the front is a flat panel, a programme built across two or three finishes still reads as one family on a showroom wall, and colour changes do not change the profile. Send us your colour references and we will match them on a sample front for approval before production.
Does the unit include the tap and waste, and what should Australian programmes specify?
The top is cut and drilled in the factory and the waste kit and drainer are supplied with the unit, in stainless steel or brass to match the handles. The tap itself is normally nominated by the Australian importer rather than bundled, because plumbing fittings sold into AU programmes are routinely required to be listed on the approval scheme the importer works to; the safest process is to send us the tap you intend to sell and we will cut and drill the deck to suit it, so there is no chipping risk at the rim and no on-site stone work. If your programme needs a different drilling pattern from the standard single-tap deck, tell us before production and we will tool it to your market standard.
How does the wall-hung fixing work on a tiled bathroom wall?
The unit hangs on a concealed steel bracket supplied with every order, so nothing is visible once it is up and the floor stays clear for cleaning. The wall behind must be capable of taking the loaded weight — a masonry wall, or a stud wall with suitable reinforcement behind the cabinet position. In Australian apartments the wall behind a bathroom vanity is frequently lightweight, so we supply a fixing guide with each order stating the unit weight, the bracket position and the minimum fixing specification, which lets the installer plan and reinforce the wall before the unit arrives rather than improvising on the day.
Can we mix widths and finishes in the same order?
Yes. The 900 mm standard unit, the 750 mm compact version and the 1200 mm double-basin version all come from the same body tooling, and finishes can be mixed within one order at a 20-piece minimum per model. That means a programme can cover an en-suite, a main bathroom and a powder room on one purchase order and one container plan instead of three separate supplier relationships. Send us your width and finish mix and we will quote the full ladder and a container load plan against it.
What is the MOQ, and which documents ship with an Australian order?
MOQ is 20 pieces per model, sizes and finishes can be mixed within one order, and samples are welcome before you commit to a run. Hangzhou Fame Industry Co., Ltd. was founded in 2008, runs a 20,000 m2 factory in Zhejiang, and has supplied global top-10 building-material brands; we hold ISO9001, CE, SGS, IP44 and FSA certification. Certificate scans and SGS inspection reports are issued with your quotation or with the shipment — email tong@famechina.com or message WhatsApp +852 6159 8571, and our Hong Kong office at Room 1510, 54 Hoi Yuen Road, Kwun Tong is available if you want to review a sample in person before booking production.

Quote This Model for Your Program

Tell us quantity, finish and destination port — we'll come back with pricing, lead time and a sample proposal.

Request a Quote