New 2026 · Australia · Coastal Sand

900 mm Coastal Sand Wall-Hung Vanity Unit — Fluted Fronts, Slim Ceramic Top

Australian bathrooms in 2026 are pulling two ways at once: a coastal palette that has moved off pure white towards sand, sage and blue-grey, and a hard preference for compact wall-hung units that keep the floor clear in apartments. This 900 mm unit answers both. A matte sand-beige carcass with continuous vertical fluting across two drawers, topped by the slim white ceramic top Australian retailers ship as standard — basin set flush, no joint line to silicone. The drawers are cut out at the back for the plumbing, the front stays handleless on a recessed finger-groove, and the body is moisture-sealed plywood with a full PVC waterproof option where the room runs humid. Quoted factory-direct from a 20-piece MOQ.

900 mm wall-hung unit — the footprint that covers AU apartment bathrooms, en-suites and powder rooms when a 1200 mm run will not fit
Fine vertical fluted (reeded) drawer fronts in matte coastal-sand lacquer — the ribbing runs continuously across both drawers so the front reads as one panel rather than two
Slim white ceramic top with the basin set flush — one non-porous piece, no countertop fabrication, nothing to reseal; the format Australian retailers list as standard
Handleless by design — a recessed finger-groove runs the full drawer width, so there is no handle to align against the tile line
Two soft-close full-extension drawers with a plumbing cut-out at the back of each — the space taken by the trap is not lost storage
Moisture-sealed plywood carcass with sealed edges; a full PVC waterproof body is available for coastal humidity, wet rooms and shower rooms
No tap hole as standard so the unit takes a wall-mounted basin mixer — the AU apartment default; single-hole or three-hole drilling to your tap on request
Sizes 600 / 750 / 900 / 1200 mm cut from the same front programme, so a full AU size range quotes as one order
Optional matching LED anti-fog or round brass-framed mirror, sized to the 900 mm unit

Request Factory Quote Back to All Bathroom Cabinets

SKU: FAME-AU-1014 · MOQ: 20 pcs · Sample order available

Specifications

Sizes	600 / 750 / 900 / 1200 mm (24″–47″); 900 mm standard; depth 460 mm, height 620 mm including the ceramic top
Construction	Moisture-sealed plywood carcass with sealed edges under a matte coastal-sand lacquer; fine vertical fluting cut into the drawer fronts; a full PVC waterproof body is available for coastal humidity and wet rooms
Top and basin	Slim white ceramic top with the basin set flush as one piece — non-porous, easy to wipe, no separate countertop to fabricate and no joint line to reseal; stone or stone-resin tops on request
Drawer arrangement	Two soft-close full-extension drawers with a plumbing cut-out at the back of each; drawer boxes on steel runners; DTC or Blum hardware
Fronts and pulls	Handleless by design — a recessed finger-groove runs the full drawer width; fluting is cut on our own programme so ribbing and grain stay consistent across a whole container
Tap drilling	No tap hole as standard, for a wall-mounted basin mixer; single-hole or three-hole basin mixer drilling to your tap specification — tell us the tap you ship with and we match the drilling
Mirror	Optional matching mirror — LED anti-fog or round brass-framed version, sized to the 900 mm unit
Installation	Wall-hung on an adjustable wall-rail mounting kit; wall reinforcement specification and fixing pack supplied with each order, suited to standard AU stud and masonry wall build-ups
Packaging	KD flat-pack in export-grade cartons with edge protection, or assembled with protected cornering; the ceramic top is crated separately and internally braced
Certifications	ISO9001, CE, SGS, IP44, FSA
MOQ	20 pieces per model; sample orders welcome for pre-production evaluation

Verification & Compliance — Evidence Behind Every Claim

Every FAME unit is built and inspected to the same standards we ship to the world's top-10 bathroom brands. Each claim below carries a verifiable anchor — certificates and inspection reports are available for review on request or during factory audits.

ISO9001 Quality management system CE EU conformity marking SGS Third-party inspected IP44 Splash & moisture resistance per IEC 60529 FSA Forest & safety assurance

IP44 moisture protection	Rated to IEC 60529 (splash-proof, protection against objects >1mm). Test method and report available on request.
Soft-close hardware	Blum optional — see Blum official specifications.
Company credentials	Founded 2009 · 20,000 m² factory · supplier to global top-10 bathroom brands. See About FAME and Certifications.
Third-party verification	SGS inspection reports and certificate scans available with your quotation — request them here.

In a Real Bathroom

Every FAME unit is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.

Product FAQ

Is a slim ceramic top actually the right spec for Australian retail?

Yes — in AU the slim ceramic top is the format retailers list as standard, usually with two soft-close drawers and the tapware sold separately. That is exactly why we quote it as the default and not as an upgrade: a single shallow ceramic top over a fluted carcass keeps the unit slim enough for apartment bathrooms, wipes clean in one pass, and pairs with the wall-mounted mixers AU buyers already specify. If your program needs a stone or stone-resin top instead, we run that on the same carcass and the same drawer fronts.

Will the finish survive a coastal or high-humidity Australian bathroom?

Yes. The standard carcass is moisture-sealed plywood with sealed edges, which is what AU buyers ask for on the spec sheet. Where the unit sits in a wet room, a shower room without a screen, or a coastal home that runs humid year-round, we supply a full PVC waterproof body on the same front and drilling specification — so the water-facing parts change without changing the look or the fit.

Why are the drawers cut out at the back, and what does that save me?

The trap and supply lines have to go somewhere, and on a 460 mm-deep wall-hung unit that is the back of the top drawer. We cut the box to clear the plumbing rather than shortening the drawer or blocking it with a dummy front, so the drawer still runs full-extension and you keep the usable depth in front of the pipework. It is the difference between a vanity that stores what the drawing promises and one that does not.

What is the MOQ and can we order a sample first?

Our MOQ is 20 pieces per model, and sample orders are welcome for pre-production evaluation before you commit to a full programme. We run a 20,000 m² factory and have supplied the world's top-10 building-material brands since 2009, so repeat AU programmes hold production slots and we quote realistic sea-freight timelines per port — Sydney, Melbourne, Brisbane and Fremantle.