900mm Sintered Stone Front Vanity — Stone Where Water Goes, Walnut Where Hands Go — FAME bathroom cabinet manufacturer
New 2026 · CL Market · Sintered Stone Front

900mm Sintered Stone Front Vanity — Stone Where Water Goes, Walnut Where Hands Go

Most stone vanities put the stone on the top and paint the doors, which is why the doors are the first thing to fail in a wet room. This unit turns that around: the two front panels are 6 mm sintered stone bonded to an aluminium honeycomb core, so the surface the water actually hits is the same non-porous slab as the countertop, and the walnut only appears on the side panels where nobody splashes. At 900 mm wide and 480 mm deep it fits the compact bathrooms that most Chilean apartments actually have, and the basin is set in flush rather than dropped on, so there is no silicone line to go black behind the rim.

  • 900 mm (35.4 in) wide wall-hung unit; 460 mm and 480 mm depths, 750 mm and 900 mm widths off the same programme
  • 6 mm sintered stone door fronts bonded to aluminium honeycomb, 2 mm shadow gaps, push-open — no handle line to break the elevation
  • Natural walnut veneer side panels and end panels, sealed on all faces for wet-room use
  • 20 mm sintered stone top in the same batch as the fronts, slim squared edge, no upstand
  • One white glazed ceramic basin set in flush with a thin rim, single tap hole pre-drilled, three-hole on request
  • 18 mm moisture-resistant carcass, one deep drawer plus one adjustable shelf, Blum hinges and TANDEMBOX optional

SKU: FAME-SS-900 · MOQ: 20 pcs · Sample order available

Specifications

Sizes900 mm (35.4 in) wide standard; 750 mm and 900 mm widths, 460 mm and 480 mm depths on the same carcass programme; carcass height 500 mm (19.7 in)
Carcass18 mm moisture-resistant board with sealed back panel and ABS-sealed edges; E1/E0 board options; full plywood carcass on request
Fronts6 mm sintered stone bonded to aluminium honeycomb core, square edges, two equal panels with 2 mm shadow gaps; push-open catches, no visible pulls
FinishWarm greige sintered stone with fine white-grey veining, matt surface at about 5 percent sheen, non-porous and UV stable; walnut veneer side panels at about 15 percent sheen
InteriorOne full-extension deep drawer with a dovetail box plus one adjustable shelf behind the second panel; interior in a pale oak decor; door-back mirror optional
Countertop20 mm sintered stone in the same batch as the door fronts, slim squared edge, no upstand; quartz or solid surface cut to the same template
BasinOne white glazed ceramic basin set in flush with a thin rim, overflow drilled; single tap hole pre-drilled, three-hole on request
HardwarePush-open catches and soft-close hinges standard; Blum hinges and Blum TANDEMBOX runners optional on the same drilling
InstallationWall-hung on a welded steel rail; masonry and 12.5 mm board over timber stud fixings supplied; 900 mm width is a one-person lift before the top is fitted
CertificationsISO9001, CE, SGS, IP44, FSA

Verification & Compliance — Evidence Behind Every Claim

Every FAME unit is built and inspected to the same standards we ship to the world's top-10 bathroom brands. Each claim below carries a verifiable anchor — certificates and inspection reports are available for review on request or during factory audits.

ISO9001 Quality management system CE EU conformity marking SGS Third-party inspected IP44 Splash & moisture resistance per IEC 60529 FSA Forest & safety assurance
IP44 moisture protectionRated to IEC 60529 (splash-proof, protection against objects >1mm). Test method and report available on request.
Soft-close hardwareBlum optional — see Blum official specifications.
Company credentialsFounded 2009 · 20,000 m² factory · supplier to global top-10 bathroom brands. See About FAME and Certifications.
Third-party verificationSGS inspection reports and certificate scans available with your quotation — request them here.

In a Real Bathroom

900mm Sintered Stone Front Vanity — Stone Where Water Goes, Walnut Where Hands Go in a real bathroom setting

Every FAME unit is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.

Product FAQ

Is a sintered stone door front actually different from a stone-look laminate?
Yes, in three ways that matter in a bathroom. The face is a fired mineral slab rather than a printed foil, so the pattern runs through the surface instead of sitting on top of it and cannot peel at an edge. It takes direct water and cleaning agents without swelling, which is the failure mode of laminate at the bottom edge of a door. And because it is bonded to an aluminium honeycomb core, the panel stays flat at 900 mm — a 6 mm slab on its own would bow. The trade-off is weight: each front is roughly twice a lacquered MDF door, which is why the hinges are specified for the load rather than chosen by habit.
Why keep walnut on the sides if the fronts are stone?
Because the sides are what you see from the doorway when the unit is viewed at an angle, and a full stone box reads as a public washroom rather than a bathroom in a home. The walnut also takes the visible end grain at the front edge, which is where a stone box would need an aluminium trim and look industrial. The sides never sit under the tap or the basin, so veneer is safe there as long as it is sealed on all faces, which is how we finish it.
Will the flush basin still be easy to clean?
Easier than a drop-in, as long as the joint is done the way we do it. The basin is set from below into a template cut in the stone, so the rim sits fractionally under the surface and the joint is a 1 mm line on a flat plane rather than a raised lip with silicone around it. There is no ledge for soap to collect. The trade-off is that the basin cannot be replaced without removing the top, which is the same constraint as any under-mounted basin.
Does a 900 mm unit suit a Chilean apartment bathroom?
It is the width that fits most of them: 900 mm leaves room for a 600 mm shower and a toilet on a 2.4 m wall, which 1200 mm units do not. Depth matters more than width here, so this programme is offered at 460 mm as well as 480 mm; the 460 mm version keeps the door clear of a door swing in the narrow layouts common in Santiago apartments. If the wall is lightweight, the steel rail has to be fixed through to the studs, and we issue the reinforcement drawing before first fix.
What is the MOQ for this model?
Our MOQ is 20 pieces per model, with sample orders welcome for pre-production evaluation.

Quote This Model for Your Program

Tell us quantity, finish and destination port — we'll come back with pricing, lead time and a sample proposal.

Request a Quote