Satin Ash Slim Shaker Kitchen — 32 mm Veneered Frame — FAME kitchen cabinet manufacturer
New 2026 · Slim Shaker · Satin Ash Veneer

Satin Ash Slim Shaker Kitchen — 32 mm Veneered Frame

Pale blonde ash veneer on a narrow 32 mm shaker frame, at 22 mm door thickness and about 15 percent sheen. The slim frame is what separates this from a standard shaker: the stile is narrow enough that the door reads as a flat plane with a fine shadow line around it, while the veneer still shows the open linear grain and the faint mineral flecks that make ash look like timber rather than a print. Five-piece doors, brushed nickel pulls, 18 mm plywood carcass behind them.

  • Five-piece slim shaker door: 32 mm ash veneered stile-and-rail frame, flat recessed centre panel, square inner corners
  • 22 mm door thickness with 3 mm even shadow gaps — a narrow frame and a fine reveal instead of a routed groove
  • Satin ash veneer at about 15 percent sheen; grain run matched across doors, drawer fronts, end panels and plinths
  • 18 mm plywood carcass with sealed edges, dovetail drawer boxes on soft-close full-extension runners
  • Slim brushed nickel 160 mm bar pulls; matte black or brushed brass on the same drilling; Blum hinges and TANDEMBOX optional
  • 20 mm white quartz worktop with slim square edge and 100 mm matching upstand, or supply-only carcass

SKU: FAME-KC-ASH · MOQ: 20 pcs · Sample order available

Specifications

Program scopeBase, wall, tall and island units quoted as one coordinated run
Construction18 mm plywood carcass with sealed edges; E1/E0 board options; MDF carcass option for veneered fronts on painted-only runs
DoorsFive-piece slim shaker, 22 mm thick, 32 mm ash veneered stile-and-rail frame with a flat recessed centre panel and square inner corners; 3 mm shadow gaps between fronts
FinishSatin ash veneer at about 15 percent sheen, grain run matched and book-matched across doors, drawer fronts, end panels, plinths and fillers; clear hard-wax-oil or PU lacquer top coat
Drawer boxesDovetail drawer boxes on soft-close full-extension runners; 40 kg rated; Blum TANDEMBOX or metal-sided option available
HardwareSlim brushed nickel 160 mm bar pulls and 30 mm knobs; matte black or brushed brass on the same drilling; Blum hinges and slides optional
Countertop20 mm white quartz with slim square edge and 100 mm matching upstand; 40 mm applied edge available; supply-only option
Toe kick100 mm recessed toe kick in the same satin ash veneer; 120 mm and 170 mm available to order; aluminium plinth option for wet zones
PackagingKD flat-pack cartons or assembled with protective cornering; fronts packed face to face with foam interleaving; veneer faces never stacked against each other
CertificationsISO9001, CE, SGS

In a Real Kitchen

Satin Ash Slim Shaker Kitchen — 32 mm Veneered Frame in a real kitchen setting

Every FAME kitchen program is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.

Product FAQ

Why specify a slim shaker frame rather than a standard 45 mm shaker?
The frame width sets the proportion of the door. At 32 mm the stile is narrow enough that the eye reads one continuous front with a fine shadow line around each door, which suits handleless-adjacent kitchens and small rooms where a wide frame closes the elevation in. A 45 mm frame is a more traditional, more heavily modelled look. Both are five-piece doors on the same carcass programme, so the choice is a tooling decision at order stage, not a different cabinet.
Is ash a sensible veneer for a working kitchen?
Yes, provided it is finished. Ash is a light, open-grained hardwood with a visible linear figure and occasional dark mineral flecks, so it reads as real timber rather than a decor print. Raw ash moves with humidity, so the doors are veneered on a stable core and sealed on all faces with a satin PU or hard-wax-oil top coat. A satin sheen hides fingerprinting better than gloss and does not flatten the grain the way a dead-matt finish can.
How is the grain matched across a run of doors?
Veneer leaves are cut from the same flitch and sequenced, then the doors in a run are laid out and matched before spraying, so the figure runs continuously from one door to the next instead of jumping. End panels, plinths and fillers are cut from the same batch. This is the step that usually gets skipped on cheap veneer programmes, and it is the first thing a buyer notices on a tall elevation.
What door thickness and carcass does this programme use?
22 mm doors on a 32 mm frame, with 3 mm shadow gaps set at the factory. Carcass is 18 mm plywood with sealed edges as standard, with E1/E0 board options; MDF carcass is available when the fronts are veneered and the interior does not need plywood. Hinges and runners are soft-close as standard and Blum hardware can be specified on the same drilling and carcass.
What is the MOQ for this model?
Our MOQ is 20 pieces per model, with sample orders welcome for pre-production evaluation.

Quote This Kitchen Program

Tell us layout, finish and destination port — we'll come back with pricing, lead time and a sample proposal.

Request a Quote