Slate Blue Matt Lacquer Kitchen — Grey Undertone, Brass Line, No Gloss — FAME kitchen cabinet manufacturer
Finish Cycle II · Slate Blue · Matt Lacquer Slab

Slate Blue Matt Lacquer Kitchen — Grey Undertone, Brass Line, No Gloss

Slate blue is the one blue that does not look like a colour decision. It carries enough grey to sit with stone, oak and stainless in the same room, and at about 6 percent sheen the fronts hold that grey without throwing a highlight across the elevation. The door is a single 19 mm slab with 3 mm shadow gaps, and the only metal in the room is a slim brushed brass bar pull at the same height on every base door — which is why this run reads calm rather than busy: one colour, one line of brass, one worktop.

  • 19 mm flat slab doors, single-piece fronts, 3 mm even shadow gaps set at the factory
  • Slate blue matt lacquer at about 6 percent sheen with a fine spray texture — grey undertone, not a clean primary blue
  • Slim brushed brass bar pulls at one height across all base doors; push-open wall cabinets optional
  • 18 mm plywood carcass with sealed edges, dovetail drawer boxes on soft-close full-extension runners
  • 20 mm white quartz worktop, slim square edge, 100 mm matching upstand; 40 mm applied edge available
  • Base, wall, tall and island units quoted as one coordinated run from a 20-piece MOQ per model

SKU: FAME-KC-SLB · MOQ: 20 pcs · Sample order available

Specifications

Program scopeBase, wall, tall and island units quoted as one coordinated run
Construction18 mm plywood carcass with sealed edges; E1/E0 board options; MDF carcass option on painted-only runs
Doors19 mm flat slab doors, single-piece fronts with square edges, 3 mm shadow gaps between fronts set at the factory
FinishSlate blue matt lacquer at about 6 percent sheen with a fine spray texture; sprayed and sanded between coats; colour matched batch to batch across fronts, end panels and plinths
Drawer boxesDovetail drawer boxes on soft-close full-extension runners; 40 kg rated; Blum TANDEMBOX or metal-sided option available
HardwareSlim brushed brass bar pulls, 160 mm centres, set at one height across all base doors; soft-close hinges standard; push-open catches for wall cabinets available; Blum hinges and slides optional
Countertop20 mm white quartz with slim square edge and 100 mm matching upstand; 40 mm applied edge available; supply-only option
Toe kick100 mm recessed toe kick in the same slate blue; 120 mm and 170 mm available to order; aluminium plinth option for wet zones
PackagingKD flat-pack cartons or assembled with protective cornering; fronts packed face to face with foam interleaving; brass pulls bagged separately per unit
CertificationsISO9001, CE, SGS

In a Real Kitchen

Slate Blue Matt Lacquer Kitchen — Grey Undertone, Brass Line, No Gloss in a real kitchen setting

Every FAME kitchen program is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.

Product FAQ

Why slate blue instead of navy or a pale dusty blue?
Because the two blues that get specified most are at opposite ends and both cause problems. Navy at close to black loses its blue in a room with one window and reads as a dark neutral. A pale dusty blue sits so light that it looks like a tinted white in photographs and disappoints on delivery. Slate blue in the middle keeps a measurable grey content, so it holds its colour under warm artificial light and still reads as a colour next to oak or stone. It is also far more forgiving on a large elevation, because the grey absorbs the small sheen differences you always get across a run of matt fronts.
Is a 6 percent matt finish practical in a working kitchen?
It is the practical middle point. A dead-matt 2 percent finish shows every finger mark around the pull and is hard to spot-clean; a gloss shows every splash. At about 6 percent with a fine spray texture the reflection is scattered rather than specular, so marks appear as a soft change rather than a stain. What matters more is the cleaning routine: a damp cloth and a neutral detergent, no abrasives, and no silicone polish, which is what actually ruins matt lacquer over a couple of years.
Why brass pulls on a blue kitchen?
Because brass is the only warm metal that stays quiet against a cool blue at this darkness. Chrome would read as an appliance, black would disappear into the fronts at the shadow gap, and copper would push the whole scheme warm. Brushed rather than polished brass also means the pull does not throw a highlight line down the run, so the one horizontal you see stays where it should be — at the pull height. If the buyer prefers no metal at all, the same fronts take a routed J-profile and the elevation becomes handle-free.
What carcass and top go behind this finish?
18 mm plywood with sealed edges as standard, because a matt front shows any carcass deflection along the 3 mm gap. E1/E0 board is available, and MDF carcass is fine where the interior does not need plywood. The worktop is 20 mm white quartz with a slim square edge and a 100 mm upstand — the upstand is worth keeping at this height because a splash line on a blue front is visible where it would not be on white. Blum hinges and runners can be specified on the same drilling.
What is the MOQ for this model?
Our MOQ is 20 pieces per model, with sample orders welcome for pre-production evaluation.

Quote This Kitchen Program

Tell us layout, finish and destination port — we'll come back with pricing, lead time and a sample proposal.

Request a Quote