New 2026 · Wall-Mounted · Carved Stone Basin

1400mm Double-Basin Wall-Hung Vanity — Two Basins Carved Into One Stone Slab

The double vanity Brazilian importers are moving to for master bathrooms: two basins carved directly into a single 12mm sintered stone slab, so there is no basin rim to silicone, no joint line to stain, and no separate countertop to fabricate at destination.

Two basins carved into one 12mm sintered stone slab — no rim, no joint, no caulk line
1400 mm double run: one 500 mm drawer bank in the centre, a door at each end
Warm oak wood-grain veneer with horizontal grain, matte low-sheen finish
Soft-close drawers and doors as standard; Blum hinges and slides optional
Wall-hung carcass on a welded steel rail — floor stays clear and easy to wash
Sizes 1200–1800 mm in the same build; custom widths quoted on one program

Request Factory Quote Back to All Bathroom Cabinets

SKU: FAME-BR-1400 · MOQ: 20 pcs · Sample order available

Specifications

Sizes	1200 / 1400 / 1600 / 1800 mm standard; depth 480 mm, height 500 mm; custom widths inside a 1200–1800 mm run
Basin & top	One 12 mm sintered stone slab with two basins carved into the top face; no separate basin, no rim, no joint line
Carcass	Oak wood-grain veneer over moisture-resistant plywood, 18 mm, ABS-sealed edges
Drawers & doors	Central 500 mm bank of two full-width soft-close drawers; one soft-close door at each end
Hardware	Brushed-brass bar pulls; Blum hinges and slides optional; push-open fronts available
Installation	Wall-hung on a welded steel rail; wall reinforcement spec and fixing kit supplied with every order
Packaging	Cabinet and stone slab crated separately, container-optimised; slab shipped on edge with foam cornering
Certifications	ISO9001, CE, SGS, IP44, FSA

Verification & Compliance — Evidence Behind Every Claim

Every FAME unit is built and inspected to the same standards we ship to the world's top-10 bathroom brands. Each claim below carries a verifiable anchor — certificates and inspection reports are available for review on request or during factory audits.

ISO9001 Quality management system CE EU conformity marking SGS Third-party inspected IP44 Splash & moisture resistance per IEC 60529 FSA Forest & safety assurance

IP44 moisture protection	Rated to IEC 60529 (splash-proof, protection against objects >1mm). Test method and report available on request.
Soft-close hardware	Blum optional — see Blum official specifications.
Company credentials	Founded 2009 · 20,000 m² factory · supplier to global top-10 bathroom brands. See About FAME and Certifications.
Third-party verification	SGS inspection reports and certificate scans available with your quotation — request them here.

In a Real Bathroom

Every FAME unit is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.

Product FAQ

Are the two basins really carved out of the same slab?

Yes. Both basins are milled into the top face of a single 12 mm sintered stone slab, so the counter and the basins are one continuous surface. There is no basin rim, no silicone joint around the bowl and no seam where water can sit — which is the main reason this format is replacing drop-in basins in humid climates.

Why 1400 mm and not 1200 mm for a double?

At 1200 mm the two bowls sit close together and the user ends up sharing one tap zone. At 1400 mm each bowl gets roughly 500 mm of clear counter, which is the width Brazilian and Portuguese buyers spec for a master bathroom with two users. Cabinet geometry is identical across the range — only the slab and the drawer bank length change.

How does sintered stone behave against the oak body?

The slab is non-porous, so it does not take up water or stain the way natural marble does, and it tolerates bathroom cleaners. The oak veneer body is built on moisture-resistant plywood with sealed edges, which is the specification that survives a bathroom without air conditioning — the condition most LatAm apartments actually run in.

Can the drawer bank be changed to doors?

Yes. The centre can be built as a drawer bank, a door pair with one internal shelf, or a mix, and the same carcass takes all three. Changes are quoted on the same program rather than as a separate model, because the drilling and the rail geometry do not change.

What is the MOQ for this model?

Our MOQ is 20 pieces per model, with sample orders welcome for pre-production evaluation.