New 2026 · US 42 in Format · Shaker Doors · Freestanding

42 in Shaker Oak Freestanding Vanity — Quartz Top, UPC Undermount Sink, 8 in Widespread Drilling

American bathrooms are wider than they look, and in 2026 the width US buyers keep coming back to is 42 inches. It is the format that fills a standard 44-48 inch alcove without the dead space a 36 inch cabinet leaves at the wall, yet it stops short of the 48 to 60 inch runs that only make sense with two bowls. For an importer it is also the most profitable slot in the range, because it takes the same door and drawer tooling as the 36 inch unit - a new SKU without a new mould. This cabinet is built for that slot the way US programmes actually specify it. It is furniture-style and freestanding, so it needs no wall reinforcement and can go into remodels where the wall is not structural, with adjustable levellers on every leg so it sits dead flat on a tiled floor. The doors are a true five-piece shaker - the dominant North American door style and the one home-centre buyers recognise instantly - in warm white-oak veneer over a solid plywood carcass, not particleboard, which is the single most common cause of warranty claims in US bathrooms. The top is engineered quartz in a 3 cm slab with a 4 inch backsplash, drilled 8 inches on centre for a widespread faucet, because that is the fitting American plumbers expect to find. The sink is a UPC-listed rectangular ceramic undermount supplied with the drain. Drawers are dovetail solid-wood boxes on full-extension soft-close undermount slides, with Blum available as an upgrade. The plywood is TSCA Title VI and CARB Phase 2 compliant for US import clearance, and CE, ISO9001 and SGS documentation ships with every order. MOQ is 20 pieces per model, and 36, 48 and 60 inch versions are tooled from the same front, so you can quote a full US size range as one programme instead of splitting it across three suppliers.

42 in (1067 mm) wide - the US single-sink width between the 36 in volume model and the 48 in double, cut for a standard 44-48 in alcove
True five-piece shaker doors in warm white-oak veneer over a solid plywood carcass - no particleboard, the leading cause of US bathroom warranty claims
Furniture-style freestanding build with adjustable levellers on every leg, so no wall reinforcement is needed for remodel programmes
3 cm engineered quartz top with a 4 in backsplash, pre-drilled 8 in on centre for a US centreset widespread faucet
UPC-listed rectangular ceramic undermount sink supplied with the drain - sized and listed for US plumbing code
Dovetail solid-wood drawer boxes on full-extension soft-close undermount slides; Blum hardware available as an upgrade
TSCA Title VI and CARB Phase 2 compliant plywood for US import clearance; ISO9001, CE and SGS documents ship with the order
Sealed interior and back panels with moisture-sealed edge banding on every panel - no raw board for a humid US bathroom to swell
36 / 48 / 60 in versions tooled from the same shaker front, so a full US size range quotes as one programme at a 20-piece MOQ per model
Matching shaker-framed mirror or recessed medicine cabinet available on the same purchase order for finish and grain matching

Request Factory Quote Back to All Bathroom Cabinets

SKU: FAME-US-0928 · MOQ: 20 pcs · Sample order available

Specifications

Sizes	42 in (1067 mm) wide x 22 in (559 mm) deep as standard; 36 / 48 / 60 in from the same shaker front family; 34 in counter height as standard, with 32 and 36 in tooled on request
Construction	Solid plywood carcass - no particleboard; sealed interior and back panels; moisture-sealed edge banding on every panel edge
Door style	True five-piece shaker (recessed centre panel) in warm white-oak veneer; painted and stained finishes available across the same front
Top / Splash	3 cm (1-1/4 in) engineered quartz in white with subtle veining; 4 in matching backsplash included; 2 cm slab available on request
Basin	UPC-listed rectangular ceramic undermount sink, white, with overflow; drain supplied; 8 in centreset widespread faucet drilling as standard
Storage	Two full-width dovetail solid-wood drawer boxes on full-extension soft-close undermount slides, plus one shaker door with an internal shelf; siphon recess cut into the rear drawer box
Hardware	Blum soft-close hinges and undermount slides optional on the same drilling pattern; Hettich and DTC available as alternatives
Installation	Freestanding furniture-style; four adjustable levellers per cabinet with an optional toe-kick base; anti-tip wall anchor kit supplied with every unit
Mirror (optional)	Shaker-framed matching mirror or recessed medicine cabinet in the same finish and grain direction; quotable on the same purchase order
Compliance	Plywood to TSCA Title VI and CARB Phase 2; ISO9001, CE, SGS, IP44, FSA - certificate scans and SGS inspection reports issued with your quotation
Packing	Knock-down or pre-assembled, foam-lined carton with corner and edge protection; container load plan supplied against your size mix
MOQ	20 pieces per model; sizes and finishes can be mixed within one order. Sample orders welcome for pre-production evaluation

Verification & Compliance — Evidence Behind Every Claim

Every FAME unit is built and inspected to the same standards we ship to the world's top-10 bathroom brands. Each claim below carries a verifiable anchor — certificates and inspection reports are available for review on request or during factory audits.

ISO9001 Quality management system CE EU conformity marking SGS Third-party inspected IP44 Splash & moisture resistance per IEC 60529 FSA Forest & safety assurance

IP44 moisture protection	Rated to IEC 60529 (splash-proof, protection against objects >1mm). Test method and report available on request.
Soft-close hardware	Blum optional — see Blum official specifications.
Company credentials	Founded 2008 · 20,000 m² factory · supplier to global top-10 bathroom brands. See About FAME and Certifications.
Third-party verification	SGS inspection reports and certificate scans available with your quotation — request them here.

In a Real Bathroom

Every FAME unit is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.

Product FAQ

Why 42 inches rather than the 36 or 48 inch unit?

42 inches is the widest single-basin format before a US bathroom really wants two bowls, so it fills the gap that a 36 inch cabinet leaves in a 44-48 inch alcove without pushing the programme into the double-basin price band. It is also the cheapest SKU to add: the door and drawer tooling is shared with our 36 inch shaker unit, so you get a new width without new tooling cost. If your range already runs 36 and 48, this is the model that closes the mid-size hole in it, and all three widths can be combined in a single order at a 20-piece MOQ per model.

Is the carcass plywood or particleboard - and why does it matter for US import?

It is solid plywood with sealed interior and back panels and moisture-sealed edge banding on every panel edge. Particleboard is the most common failure point in US bathrooms because an unsealed cut edge swells the moment it takes on moisture, and it is the leading driver of warranty claims and returns in this category. Our plywood is also produced to TSCA Title VI and CARB Phase 2, which is what a US importer needs for formaldehyde compliance at clearance, and we issue the supporting documentation with the quotation rather than after the container lands.

What faucet drilling does the top come with?

Three-hole, 8 inches on centre - the standard US centreset widespread faucet drilling - is fitted as standard so your customer can fit the faucet they already sell. If your programme uses a single-lever or a 4 inch centreset faucet instead, tell us the drilling before production and we cut it to your market standard. Because the top is quartz, the drilling is done on a CNC before polishing, so the hole is clean and there is no chipping risk at the rim.

Is the sink listed for US plumbing code, and is the drain included?

The rectangular ceramic undermount sink is UPC-listed, which is what most US jurisdictions look for at inspection, and the drain is supplied with the unit so buyers are not sourcing a separate part. The sink is set into the quartz on a full-perimeter seal with no rim standing proud of the surface, so there is no lip for water or cleaning product to sit against. Overflow is standard.

What is the MOQ, and which documents ship with a US order?

MOQ is 20 pieces per model, with samples welcome before you commit to a run, and sizes and finishes can be mixed within one order. Hangzhou Fame Industry Co., Ltd. has supplied global top-10 building-material brands since 2008 from a 20,000 m2 factory in Zhejiang, and we hold ISO9001, CE, SGS, IP44 and FSA certification. Certificate scans and SGS inspection reports are issued with your quotation or with the shipment - request them at tong@famechina.com or on WhatsApp +852 6159 8571.