
900mm Aluminium Coastal Vanity
The same welded aluminium body one size up, in a matte blue-grey powder coat.
View product →
The brief we keep getting from Chilean importers in 2026 is short: a floating unit that fits a compact apartment bathroom, reads as warm wood rather than grey board, and survives the humidity of a coastal city. Those three requirements pull against each other, because the material that survives humidity — sealed board, PVC, aluminium — is also the material that usually looks like a utility cabinet rather than a piece of furniture. This 800 mm unit is our answer to that. The carcass and both drawer fronts are an extruded aluminium body with sealed welded corners and a cured wood-grain powder coat, so there is no raw board edge anywhere in the wet zone for moisture to reach, and nothing that rusts in salt air — but the surface you actually see is a warm walnut-effect grain, not bare metal. 800 mm is the width that suits a Chilean apartment: wide enough for a genuinely usable basin and two full-width drawers, narrow enough to keep the door swing and the floor clear. Two soft-close drawers on full-extension runners give the storage, each with one slim brushed-brass bar handle as the only deliberate metal in the composition, and the matching mirror above carries the same wood-grain frame so the pair reads as one piece on the wall. MOQ is 20 pieces per model, and because the same body tooling runs 600 mm through 1200 mm, an importer can quote a full Chilean size ladder as one programme instead of three suppliers.
SKU: FAME-CL-1001 · MOQ: 20 pcs · Sample order available
| Sizes | 800 mm (31.5 in) wide x 480 mm (19 in) deep as standard; 600 / 700 / 900 / 1000 / 1200 mm versions tooled from the same body; 850 mm counter height as standard, with 800 mm and 900 mm available on request |
|---|---|
| Construction | Extruded aluminium cabinet body and drawer fronts with sealed welded corners and a cured wood-grain powder coat inside and out — no timber or particleboard cut edge in the wet zone |
| Front / drawer style | Two stacked full-width drawer fronts in a flat wood-grain finish; one slim horizontal brushed-brass bar handle per drawer; handleless push-open fronts available as an option |
| Finish | Warm walnut wood-grain as standard; lighter oak-effect, greige and matte white finishes available across the same tooling |
| Top | Slim white engineered stone, approx. 20 mm thick with a small even overhang; sintered stone and natural stone-look alternatives available |
| Basin | White glazed ceramic basin set flush into the top with no proud rim; drilled and cut in the factory; overflow and waste kit supplied |
| Mirror | Matching tall rectangular mirror in the same wood-grain frame; LED backlit with touch switch, anti-fog and 3 colour temperatures, or a plain non-LED version |
| Storage | Two stacked soft-close drawers on full-extension runners; siphon recess cut into the lower drawer box so the pipework clears the runner |
| Hardware | Blum soft-close runners and hinges available as an upgrade on the same drilling pattern; Hettich and DTC available as alternatives; all fixings supplied |
| Tap (not bundled) | Single-hole deck drilled at the factory; the tap is normally nominated by the importer — send us the tap you intend to sell and we cut and drill the deck to suit it, so there is no on-site stone work |
| Installation | Wall-hung on a concealed steel hanging bracket; masonry or suitably reinforced stud wall required — a fixing guide stating unit weight and minimum fixing spec is supplied with each order |
| Compliance | ISO9001, CE, SGS, IP44 and FSA; certificate scans and SGS inspection reports issued with your quotation on request |
| Warranty | 5-year structural warranty available on request for programme orders |
| Packing | Semi-assembled or knock-down, foam-lined carton with corner and edge protection; container load plan supplied against your size and finish mix |
| MOQ | 20 pieces per model; widths and finishes can be mixed within one order. Sample orders welcome for pre-production evaluation |
Every FAME unit is built and inspected to the same standards we ship to the world's top-10 bathroom brands. Each claim below carries a verifiable anchor — certificates and inspection reports are available for review on request or during factory audits.
| IP44 moisture protection | Rated to IEC 60529 (splash-proof, protection against objects >1mm). Test method and report available on request. |
|---|---|
| Soft-close hardware | Blum optional — see Blum official specifications. |
| Company credentials | Founded 2008 · 20,000 m² factory · supplier to global top-10 bathroom brands. See About FAME and Certifications. |
| Third-party verification | SGS inspection reports and certificate scans available with your quotation — request them here. |
Every FAME unit is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.
Tell us quantity, finish and destination port — we'll come back with pricing, lead time and a sample proposal.
Request a Quote