900mm Haussmann Panel Oak Vanity — French Mouldings in Warm Oak, Wall Hung — FAME bathroom cabinet manufacturer
New 2026 · FR Market · Haussmann Panel

900mm Haussmann Panel Oak Vanity — French Mouldings in Warm Oak, Wall Hung

French buyers ask for two things that usually pull in opposite directions: a cabinet that reads as classic, with the framed door and moulding profile you see in a Haussmann apartment, and a carcass that survives a bathroom. This unit answers both by treating the moulding as a separate applied element rather than carving it into the door. The door is a flat 18 mm panel in light-oak veneer with a satin face; the moulding is a slim 40 mm profile applied 45 mm in from the door edge, so the shadow line is crisp and the panel stays flat through a humid season. One-piece moulded white ceramic basin and top means no silicone joint behind a rim, and at 900 mm on a 480 mm carcass it fits the bathrooms in the apartments that actually drive volume in Lyon, Bordeaux and the Paris suburbs — wide enough for a comfortable single bowl, shallow enough to clear a door swing.

  • 900 mm wide wall-hung cabinet, 480 mm deep, 520 mm carcass height; 700 mm, 800 mm and 1000 mm widths on the same carcass programme
  • 18 mm framed-look doors in light-oak veneer with a slim 40 mm applied panel moulding set 45 mm from the door edge
  • One-piece moulded white glazed ceramic basin and top with a thin 20 mm rim, overflow drilled, single tap hole
  • One wide drawer under two doors, aged-brass knob on each door and a 160 mm aged-brass bar pull on the drawer
  • 18 mm moisture-resistant plywood carcass, sealed back panel, ABS-sealed edges, one adjustable shelf behind the doors
  • Soft-close hinges standard; Blum hinges and TANDEMBOX runners available on the same drilling; MOQ 20 pcs per model

SKU: FAME-HS-900 · MOQ: 20 pcs · Sample order available

Specifications

Sizes900 mm (35.4 in) wide standard, 480 mm deep, 520 mm carcass height; 700 mm, 800 mm and 1000 mm widths and 450 mm depth on the same carcass programme
Carcass18 mm moisture-resistant plywood with sealed back panel and ABS-sealed edges; E1/E0 board option; MDF carcass available for dry-wall installations
Fronts18 mm doors in light-oak veneer on a stable core, flat panel with a slim 40 mm applied moulding 45 mm in from the door edge, square outer edge, 3 mm shadow gaps
FinishLight oak, warm honey tone with straight vertical grain, satin at about 10 percent sheen, sealed face on both sides; colour matched batch to batch across doors, drawer front and end panels
Basin and topOne-piece moulded white glazed ceramic basin and countertop, 20 mm flat rim, gentle inner bowl, overflow drilled; single tap hole pre-drilled, three-hole on request
InteriorOne full-extension drawer with a dovetail box under the doors plus one adjustable shelf behind them; interior in a pale oak decor
HardwareSoft-close hinges standard; aged-brass knob on each door and a 160 mm aged-brass bar pull on the drawer, on 96 mm and 160 mm centre drilling; Blum hinges and Blum TANDEMBOX runners optional
InstallationWall-hung on a welded steel rail with masonry and 12.5 mm board over timber stud fixings supplied; the basin top is set after hanging, so the 900 mm carcass stays a one-person lift
CareDamp cloth with neutral detergent for the lacquered oak face and the glazed ceramic; no abrasive cream and no silicone polish on the satin face
CertificationsISO9001, CE, SGS, IP44, FSA

Verification & Compliance — Evidence Behind Every Claim

Every FAME unit is built and inspected to the same standards we ship to the world's top-10 bathroom brands. Each claim below carries a verifiable anchor — certificates and inspection reports are available for review on request or during factory audits.

ISO9001 Quality management system CE EU conformity marking SGS Third-party inspected IP44 Splash & moisture resistance per IEC 60529 FSA Forest & safety assurance
IP44 moisture protectionRated to IEC 60529 (splash-proof, protection against objects >1mm). Test method and report available on request.
Soft-close hardwareBlum optional — see Blum official specifications.
Company credentialsFounded 2009 · 20,000 m² factory · supplier to global top-10 bathroom brands. See About FAME and Certifications.
Third-party verificationSGS inspection reports and certificate scans available with your quotation — request them here.

In a Real Bathroom

900mm Haussmann Panel Oak Vanity — French Mouldings in Warm Oak, Wall Hung in a real bathroom setting

Every FAME unit is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.

Product FAQ

Is the moulding carved into the door or applied?
Applied, and that is the point of the design. A carved or routed profile removes material at the door edge, which is exactly where a bathroom door takes moisture first; over a season the routed line can open and the shadow gap starts to look uneven. A separate 40 mm profile glued and pinned to a flat 18 mm panel keeps the panel's full thickness at the edge, keeps the door flat, and gives a sharper shadow line than a moulded-on profile. It also means the panel can be replaced in a repair without remaking the whole door, and the profile can be specified in a different depth on the same door if a project wants a lighter or heavier reading.
Why 900 mm with a single basin?
Because 900 mm is the width that gives a usable single bowl with counter space either side, and it still fits a 2.4 m bathroom wall alongside a 700 mm shower and a toilet. In French apartments the constraint is almost always depth and door swing rather than length, which is why the same carcass is offered at 450 mm depth — the shallow version clears a door that opens into the room. Projects with two users and the space for it go to the 1000 mm and 1200 mm double-basin versions, which sit on the same carcass programme and the same drilling pattern.
Does a veneered door work in a wet room?
It does, provided the face is a sealed veneer on a stable core rather than a raw slice, and the edges are sealed. Every door here is sealed on both faces with ABS edging, so splash on the front cannot reach the core, and the back of the door is finished the same way because that is the face that sees steam. What fails in a bathroom is a floor-standing plinth that swells, and a joint behind a dropped-in basin rim; this unit removes both — it is wall-hung, and the basin is moulded into the top as one piece. For coastal projects we add stainless fixings and a sealed back panel on request.
Can the brass hardware be changed or removed?
Yes, and it is worth fixing at order. The default is an aged-brass knob on each door and a 160 mm bar pull on the drawer, both on standard 96 mm and 160 mm centres. The same fronts can be supplied with brushed nickel or matte black pulls, or with a routed finger pull along the top edge of the drawer only, without changing the door or the moulding. If the project asks for Blum TANDEMBOX instead of our standard soft-close runner, the drawer box and the drilling change together, so it has to be on the order rather than retrofitted.
What is the MOQ and can widths be mixed?
Our MOQ is 20 pieces per model, with sample orders welcome for pre-production evaluation. Widths, the 450 mm and 480 mm depths, and the two hardware finishes can be mixed inside the 20 pieces because the carcass, the 32 mm drilling and the 3 mm shadow gap are identical across the programme.

Quote This Model for Your Program

Tell us quantity, finish and destination port — we'll come back with pricing, lead time and a sample proposal.

Request a Quote