
800mm Oak Matt-Lacquer Wall-Hung Vanity
The same 800 mm apartment width in an oak matt-lacquer front, with a ceramic countertop basin.
View product →
German bathrooms are the tightest in Western Europe, and the constraint is not floor area alone - it is where the wall is. Most apartment bathrooms in Germany sit between 1.5 and 2.2 metres across, frequently with the door swinging inwards, the WC on the same wall run and no window to vent through, so the wall behind the basin is the only surface left for the vanity. That is why the wall-hung unit has never really been optional in this market: nothing touches the floor, the room reads a whole tile wider, and the floor underneath can be mopped in one pass without pulling out a cabinet. This 800 mm unit is built for exactly that wall. It sits inside the German width band that matters - 600 mm for guest WCs and the smallest city bathrooms, 800 mm as the volume width for a single basin, 1000 and 1200 mm for the family bathroom - and we tool all four from the same front, so an importer can cover the whole apartment range as one program at a 20-piece MOQ per model instead of chasing four separate suppliers. The front is a matt greige lacquer - the warm grey-beige that has replaced both clinical white and cold flat grey in German specification over the last two seasons - with fine vertical fluting milled into the panel itself rather than applied as a glued strip, so the ribs cannot lift at the edges in a room that gets steamed every morning. It is handleless: the upper drawer opens on a recessed grip groove running the full width under the top edge, which removes the single most common snag point in a narrow bathroom and gives the front one uninterrupted line of ribs. The top is a 20 mm sintered-stone slab with the shallow basin formed as one continuous piece with it - no cut-out, no separate ceramic bowl, no rim, no silicone joint to fail, and nothing to template on site. No tap hole is drilled as standard, which is deliberate: it leaves the top clean for a wall-mounted mixer, the fitting German installers and their clients ask for most often because it keeps the counter free and the water out of the cabinet. Two full-width soft-close drawers run on full-extension runners with the siphon recess cut into the rear panel, the carcass is sealed multi-layer plywood with a full PVC waterproof body available for interior bathrooms, and the matching slim LED mirror is quotable on the same purchase order so finish and light temperature match instead of arriving as two suppliers' separate best attempts.
SKU: FAME-MF-1810 · MOQ: 20 pcs · Sample order available
| Sizes | 800 mm (31.5 in) wide standard; 600 / 1000 / 1200 mm from the same front family; 460 mm deep, 500 mm cabinet height, wall-hung |
|---|---|
| Construction | Sealed multi-layer plywood carcass with moisture-sealed edges as standard; full PVC waterproof body available for windowless interior bathrooms |
| Fronts / Finish | Matt greige (warm grey-beige) lacquer with fine vertical fluting milled into the panel, low-sheen anti-fingerprint surface; 8 matt project colours available at no tooling cost |
| Operation | Fully handleless - full-width recessed grip groove under the top edge of the upper drawer front; no protruding handle, no push-to-open mechanism to wear out |
| Top / Basin | 20 mm slim white sintered-stone slab with the shallow basin formed as one continuous piece with the top - no joint, no rim, no separate bowl to seal; supplied ready to install with no countertop fabrication required |
| Storage | Two full-width soft-close drawers with full-extension runners; siphon recess cut into the rear panel of the upper drawer; internal anti-slip lining and reinforced base panel |
| Hardware | Blum soft-close hinges and runners optional; Hettich and DTC available on the same drilling pattern |
| Tap (optional) | No tap hole drilled as standard - top supplied clean for a wall-mounted mixer (Wandarmatur). Deck-mounted single-lever mixers in polished chrome, brushed steel or matt black available with drilling to your specification |
| Mirror (optional) | Matching slim LED backlit mirror with anti-fog glass and three-colour light, IP44 rated; quotable on the same purchase order as the vanity so finish and grain direction match |
| Installation | Wall-mounted on a concealed steel bracket; wall-reinforcement and anchor specification supplied with every order for both solid masonry and drywall construction |
| Load rating | Top surface 50 kg, each drawer 12 kg; reinforced base panel under the basin |
| Certifications | ISO9001, CE, SGS, IP44, FSA - certificate scans and SGS inspection reports issued with your quotation or with the shipment |
| MOQ | 20 pieces per model; mixed widths from the same front family can be combined in one order. Sample orders welcome for pre-production evaluation |
Every FAME unit is built and inspected to the same standards we ship to the world's top-10 bathroom brands. Each claim below carries a verifiable anchor — certificates and inspection reports are available for review on request or during factory audits.
| IP44 moisture protection | Rated to IEC 60529 (splash-proof, protection against objects >1mm). Test method and report available on request. |
|---|---|
| Soft-close hardware | Blum optional — see Blum official specifications. |
| Company credentials | Founded 2008 · 20,000 m² factory · supplier to global top-10 bathroom brands. See About FAME and Certifications. |
| Third-party verification | SGS inspection reports and certificate scans available with your quotation — request them here. |
Every FAME unit is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.
Tell us quantity, finish and destination port — we'll come back with pricing, lead time and a sample proposal.
Request a Quote