900mm Microcement Vanity — Hand-Trowelled Fronts and a One-Piece Cast Basin

French bathrooms are small and usually windowless, which is why the finish matters more here than the size. A white gloss cabinet in a 4m² salle de bain reflects every bulb and makes the room feel like a showroom; a hand-trowelled microcement front absorbs that light the way the walls do, so the cabinet reads as part of the room instead of an object standing in it. This run takes the material that French specifiers already use on walls — a two-coat mineral microcement over a 6mm fibre-cement carrier, sealed with a matte water-repellent topcoat — and puts it on a 900mm wall-hung carcass. The surface is trowelled by hand in two passes, so the tonal clouds and the faint trowel drag are different on every door; that is the point of the finish and it is also why no two units match exactly. In front of it sits a counter and basin cast as one piece in mineral solid surface, 20mm thin at the edge, so the top line is a single unbroken plane rather than a slab with a bowl dropped into it. There are no handles: both drawers are push-open on Blum Tip-On, with the front edges set 3mm off the carcass so the shadow gap is the only line you read. The cabinet hangs at 480mm tall on a galvanised rail, which leaves the floor visible under it in a room where every 100mm counts, and it is specified in 800, 900 and 1000mm widths on the same depth. A 20-piece OEM/ODM programme for French importers, négoces and hotel refurbishment specifiers.

• Fronts finished in hand-trowelled microcement — two mineral coats over a 6mm fibre-cement carrier, sealed with a matte water-repellent topcoat, so the surface has the chalky depth of a béton ciré wall rather than the flat sheen of a lacquered door
• Warm grey-beige tone with natural trowel variation in every panel — the tonal clouds and faint drag marks are hand-made, so a run reads as plasterwork instead of six identical printed fronts
• Sealed, not raw: the topcoat is a two-component water-repellent matt that resists splashes and bathroom cleaners, and a damaged corner can be re-trowelled and re-sealed on site without respraying the whole front
• Counter and basin cast as one piece in mineral solid surface, 20mm at the edge — a single unbroken top line with no joint, no separate ceramic bowl to source, and a shallow rectangular bowl with soft radiused internal corners
• Non-porous cast surface with a matte finish that can be sanded and re-polished on site — no glaze to chip, and no gel-coat layer that lifts at the waste
• Completely handleless: both drawers are push-open on Blum Tip-On, with front edges set 3mm off the carcass so the only line on the face is a shadow gap, not a pull or a finger recess
• 18mm plywood carcass with sealed ABS edges and an 8mm back panel — plywood rather than chipboard, because a flush handleless front shows any rack in the box as a widening gap
• Top drawer with a factory-cut siphon recess, so a bottle trap sits behind the drawer instead of eating the storage; the lower drawer runs full depth
• Blum TandemBox soft-close full-extension runners, 30kg rated, with a push-open option on the same drilling; cost-equivalent Chinese runners available for entry price points
• Wall-hung on a galvanised steel rail, two M10 anchors per stud bay, 150kg static rating — fixing drawings and a wall-reinforcement schedule ship with every order
• Counters supplied undrilled for wall-mounted mixers, or drilled at the factory to a supplied tap template; the 460mm depth suits compact French bathrooms where 500mm blocks the door swing
• Optional IP44 LED mirror at 900×800×30mm with anti-fog demister, touch switch and 3000/4000/6000K, wired to a single 220V wall box on a 1.5m flex

SKU: FAME-FR-1031 · MOQ: 20 pcs · Sample order available