Mauve Matt Lacquer Kitchen — A Muted Lilac That Reads as a Neutral — FAME kitchen cabinet manufacturer
Finish Cycle II · Mauve · Matt Lacquer Slab

Mauve Matt Lacquer Kitchen — A Muted Lilac That Reads as a Neutral

Mauve is the colour buyers arrive at after they have already rejected grey, cream and sage: it is a greyed, dusty lilac that sits between the warm neutrals and a colour statement, and it changes with the light rather than fighting it. The risk with a colour at this saturation is that it goes candy-pink under 2700 K lamps and lilac-grey in daylight, so the pigment here is loaded low into a matt base at about 8 percent sheen — enough to keep the tone stable and dull enough to hide the tonal drift that a satin or gloss finish would amplify across a 3 m elevation. The door is a single 19 mm slab with a handleless J-profile routed into the top edge, so there is no pull line to break the colour field, and the 3 mm shadow gaps do the work that beading does on a framed door.

  • 19 mm flat slab doors, single-piece fronts, square edges, 3 mm even shadow gaps set at the factory
  • Mauve matt lacquer at about 8 percent sheen — a greyed lilac-pink, low pigment loading, no pearl or metallic content
  • Handleless J-profile routed into the top edge as the default elevation; 160 mm brass or nickel bar pulls as the alternative
  • 18 mm plywood carcass with sealed edges, dovetail drawer boxes on soft-close full-extension runners
  • 20 mm white quartz worktop with a slim square edge and 100 mm matching upstand; 40 mm applied edge available
  • Base, wall, tall and island units quoted as one coordinated run from a 20-piece MOQ per model

SKU: FAME-KC-MVE · MOQ: 20 pcs · Sample order available

Specifications

Program scopeBase, wall, tall and island units quoted as one coordinated run; European modular widths from 300 to 1000 mm on a 100 mm grid with a 3 mm door gap
Construction18 mm plywood carcass with sealed edges; E1/E0 board options; MDF carcass option on painted-only runs; 720 mm high wall units and 570 mm deep base units
Doors19 mm flat slab doors, single-piece fronts with square edges, 3 mm shadow gaps between fronts set at the factory; J-profile routed into the top edge for the handleless option
FinishMauve matt lacquer at about 8 percent sheen: greyed lilac-pink pigment at low loading in a matt base, sprayed and sanded between coats, no pearl or metallic content; colour matched batch to batch across fronts, end panels and plinths; tested to 72 hours at 40 degrees C and 90 percent humidity without edge lift
Drawer boxesDovetail drawer boxes on soft-close full-extension runners rated to 40 kg; Blum TANDEMBOX or metal-sided boxes available on the same drilling
HardwareSoft-close hinges standard; handleless J-profile as the default elevation, or 160 mm bar pulls in aged brass or brushed nickel set at one height across the run; Blum hinges and slides optional
Countertop20 mm white quartz with a fine speckle, slim square edge and 100 mm matching upstand; 40 mm applied edge available; supply-only option
Toe kick100 mm recessed toe kick in the same mauve lacquer; 120 mm and 170 mm to order; aluminium plinth option for wet zones
PackagingKD flat-pack cartons or assembled with protective cornering; lacquered fronts packed face to face with foam interleaving and a film barrier against chipping at the door edge
CertificationsISO9001, CE, SGS

In a Real Kitchen

Mauve Matt Lacquer Kitchen — A Muted Lilac That Reads as a Neutral in a real kitchen setting

Every FAME kitchen program is produced in our 20,000 m² factory, inspected against the same standards we ship to the world's top-10 bathroom brands, and container-optimized for your program.

Product FAQ

How does mauve differ from the clay pink and the sage already in the range?
Temperature and grey content. Sage sits on the green-grey axis and reads cool and earthy; clay pink is warmer and reads as a plaster or terracotta tone. Mauve deliberately carries a visible violet shift over a grey base, which is what stops it looking like a faded pink and lets it sit next to white quartz, pale oak and brushed metal without a colour clash. The pigment loading is low — roughly half of a decorative accent colour — because at higher loading a large elevation shifts toward candy pink under 2700 K lighting and then looks wrong in daylight. At this loading the tone stays in the lilac-grey band across both.
Is a mauve lacquer difficult to keep looking even?
It is easier than a dark colour and slightly less forgiving than white, and the reason is contrast rather than dirt. At about 8 percent sheen, reflection is scattered, so a mark on a flat door appears as a soft tonal change instead of a bright patch; it wipes off with a damp cloth and neutral detergent. What it does not tolerate is abrasive cream, which leaves a lighter sheen patch that is far more visible on a tinted lacquer than on white, or a silicone polish that builds a film along the door edge. The handleless J-profile removes the habitual contact point where fingerprints gather, which is the main reason the elevation stays even.
Why a slab door rather than a shaker for this colour?
Because a colour at this saturation needs one plane. On a framed door the pigment sits on a recessed panel and on four rails at different angles, so the light catches each surface slightly differently and the elevation reads as uneven — which is character on a painted cream shaker and a defect on a tinted lacquer. A single 19 mm slab presents one surface and one continuous tone, and the shadow gap supplies the only line in the composition. It also keeps the run consistent when base, wall and tall units are stacked, because there is no rail width to align across heights.
What carcass and worktop suit this finish?
18 mm plywood with sealed edges as standard, because a tinted front reflects any carcass deflection along the 3 mm gap more visibly than white does. E1/E0 board is available and MDF carcass is fine where the interior does not need plywood. The worktop is 20 mm white quartz with a slim square edge and a 100 mm upstand — the upstand matters here because a splash line on a tinted front is more visible than on a neutral. Blum hinges and runners can be specified on the same drilling; for wet zones an aluminium plinth is safer than a painted one.
What is the MOQ for this model?
Our MOQ is 20 pieces per model, with sample orders welcome for pre-production evaluation. Widths, and handleless or pull versions, can be mixed inside the 20 pieces because the carcass, the 32 mm drilling and the 3 mm gap are identical across the run.

Quote This Kitchen Program

Tell us layout, finish and destination port — we'll come back with pricing, lead time and a sample proposal.

Request a Quote